Mitox 6220 Manuel de l'opérateur télécharger pdf (Page 22)

6220 / 6224 Chainsaw

Original Instructions Version May 13

Adjusting Oil Flow Rate

Never ll the oil reservoir or adjust the oiler with the engine running.

An increase in bar oil ow rate will speed oil consumption, requiring more frequent checks on the oil

reservoir. To ensure sucient lubrication, it may be necessary to check the oil level more frequently than at

fuel tank rells. The guide bar and chain are lubricated automatically by a pump that operates whenever

the chain rotates. The pump is set at the factory to deliver a minimum ow rate, but it can be adjusted in the

eld. A temporary increase in oil ow is often desirable when cutting hardwood.

Adjust the pump as follows:

1. Stop the engine and make sure the stop switch is in the OFF position.

2. Adjust the oil ow rate using the adjusting screw on the top cover of the machine.

3. With a screwdriver, turn he oil ow rate adjusting screw in the desired direction:

Clockwise-decrease lubrication / Counter clockwise-increase lubrication.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Pas de commentaire

Mitox 6220 Manuel de l'opérateur Page 22